HYOSUNG COMET 125 Service Manual page 81

NEUTRAL CAM STOPPER
Put in the neutral cam stopper, spring and washer,
tighten the cam stopper plug to the specified torque.
Neutral cam stopper plug
: 20~25 N m(2.0~2.5 kg m)
OIL DRAIN PLUG
Tighten the oil drain plug to the specified torque.
Engine oil drain plug
: 18~20 N m(1.8~2.0 kg m)
STATOR
Apply a small quantity of THREAD LOCK 1324 to
the threaded parts of screws.
THREAD LOCK 1324
STARTER CLUTCH
When installing the starter clutch and rotor, apply the
THREAD LOCK 1324 to the bolts and tighten to
the specified torque.
THREAD LOCK 1324
Starter clutch bolt
: 15~20 N m(1.5~2.0 kg m)
MAGNETO ROTOR
Fit the key in the key slot on the crankshaft.
With the magneto rotor, install the starter clutch
on the crankshaft.
Apply a small quantity of THREAD LOCK 1324 to
the threaded parts of crankshaft.
THREAD LOCK 1324
ENGINE 3-44