HYOSUNG COMET 125 Service Manual page 132

Remove the dust seal
CAUTION
Care not to cause scratch on the cylinder bore.
Do not reuse the piston seal and dust seal that
have been removed.
CALIPER INSPECTION
Inspect the caliper cylinder wall and piston surface for
scratch, corrosion or other damages.
If any abnormal condition is noted, replace the caliper.
CALIPER REASSEMBLY
Reassemble the caliper in the reverse order of disas-
sembly procedures and observe the following points.
CAUTION
Wash the caliper components with fresh brake
fluid before reassembly. Do not wipe off brake
fluid after washing the components.
Replace the piston seal and dust seal with new
ones with brake fluid applied.
Brake fluid specification and classification
Install the brake pad spring.
and piston seal .
: DOT 3 or DOT 4
CHASSIS 6-8