HYOSUNG COMET 125 Service Manual page 140

Remove the damper rod bolt by using the special tool.
T Handle : 09940-34520
D Attachment : 09940-34561
T Type hexagon wrench (6mm)
Separate the inner tube from outer tube.
Remove oil lock piece and damper rod with
rebound spring.
Remove the snap ring by using the snap ring plier.
Remove the oil seal by using the special tool.
Oil seal remover : 09913-50121
CAUTION
The oil seal removed should be replaced with a new
one.
: 09914-25811
CHASSIS 6-16