Table of Contents
Advertisement
4. Connect any cables to add-in cards that require them. See your add-in card
documentation for information and add-in card requirements.
Installing and Removing a PCI Add-in Card
The instructions below describe how to install and remove a PCI add-in card.
Installing a PCI Add-in Card
1. Remove the filler panel from the add-in card slot.
2. Insert add-in card until it seats in riser card connector (see letter "A").
3. Screw the add-in card in place (see letter "B").
Note: Make sure that all empty add-in card slots have filler panels installed.
Removing a PCI Add-in Card
1. Remove the screw holding the add-in card in place (see letter "A").
2. Remove the PCI add-in card from the riser card connector (see letter "B").
Note: Make sure that all empty add-in card slots have filler panels installed.
40
B
Figure 42. Installing a Full Height Add-In Card
A
Figure 43. Removing a Full Height Add-In Card
A
AF002367
B
AF002368
®
Intel
Server System SR1560SF Service Guide
Advertisement
Table of Contents
Need help?
Do you have a question about the SR1560SFHS - Server System - 0 MB RAM and is the answer not in the manual?