Console Redirection - Fujitsu BX630 - PRIMERGY - S2 Dual Operating Manual

BIOS Setup
Enabled
If the bank is fitted, the memory module is used by the system.
Re-enable Failed DIMMs
Resets all memory modules flagged as Failed to Enabled.
6.6.3

Console Redirection

Figure 20: Console Redirection menu
Port
Defines the port used for communication with the terminal (Serial # or
Disabled). The Disabled setting switches off the terminal functionality and
makes the other parameters described in this section disappear.
Baud Rate:
Requirement: The Port field must not be set to Disabled.
Defines the transfer speed used for communication with the terminal.
This setting must be the same both on the terminal and on the server.
300, 1200, 2400, 9600, 19.2K, 38.4K, 57.6K, 115.2K
The data is transferred to the terminal at the selected transfer rate.
BX630 S2
Operating Manual
Server menu
69