Connecting Devices - Fujitsu BX630 - PRIMERGY - S2 Dual Operating Manual

Connecting Devices

4.4 Connecting Devices
All the connections required for operating the BX630 S2 Scalable Server Blade
are made via the midplane of the PRIMERGY BX600 S2 or BX600 S3 basic
unit. When you install the server blade, connections to the infrastructure
modules on the back of the basic unit are made automatically by means of plug
connectors:
– Power supply units
– Management blade(s) for server administration
– KVM blade for connecting a monitor, keyboard and mouse
– Ethernet switch blade(s) and/or pass-thru blades for connecting to the LAN
– Fibre channel switch blades or pass-thru blades for connection to a SAN
(optional, requires installation of an FC daughter card in the server blade,
see Options Guide)
For information on connecting external devices via the infrastructure modules of
the BX600 S2 or BX600 S3 basic unit, see the basic unit operating manual.
28 Operating Manual
Installing the Hardware
BX630 S2