Fujitsu BX630 - PRIMERGY - S2 Dual Operating Manual page 27

Installing the Hardware
Figure 5: Final engaging of the locking mechanism
Removing the server blade
Remove the server blade in the same way as the dummy module (see
"Removing the Dummy Module" on page
V
CAUTION!
If a server blade has been removed and no new blade is installed in its
place, you must install a dummy module in the empty slot.
BX630 S2
Installing the Server Blade in the Basic Unit
Ê Press the locking handles inward
until the locking mechanism
engages fully.
24).
Operating Manual 27