Features - Fujitsu BX630 - PRIMERGY - S2 Dual Operating Manual

Features

1.3 Features
Processors
In the BX630 S2 dual-socket server blade, one (basic configuration) or two
AMD Opteron quad-core processors of the 23xx DP and 83xx MP series ensure
extremely high data throughput and system performance.
All processors have a 2-MB second-level cache (SLC).
I
It is not possible to use CPUs with different clock rates or cache capacity
in a server blade.
In the BX630 S2 quad-socket server blade, only processors of the
Opteron 83xx MP series are allowed.
For upgrading processors see the Options Guide; for exchanging processors
see the Service Supplement.
Memory
The BX630 S2 dual-socket server blade has eight memory slots. Each
processor is assigned four memory slots. Two memory slots make up one
memory bank. The memory slots must be fitted by bank, i.e. with pairs of
memory modules. The server blade supports memory modules of the type
DDR2 667 with 512 MB, 1 GB, 2 GB or 4 GB capacity, so the maximum config-
uration is 32 GB (64 GB in a quad-socket server blade). ECC with memory
scrubbing and ChipKill™ are supported. Only memory modules of the same
capacity can be installed in the same memory bank.
How to install memory modules is described in the Options Guide.
LAN availability
The BX630 S2 dual-socket server blade has two onboard Ethernet LAN
controllers with two 1-Gbit/s Ethernet channels each. The Ethernet LAN
connection can be implemented via switch blades or via pass-thru blades on the
back of the basic unit. For more information see the operating manual for the
basic unit.
I
You can only use the two 1-Gbit/s Ethernet channels of the second
onboard LAN controller in connection with the BX600 S3 basic unit and
the Gbit Ethernet LAN switch blade (SB9f) 12 x 1 Gbit.
8 Operating Manual
Preface
BX630 S2