Fujitsu BX630 - PRIMERGY - S2 Dual Operating Manual page 33

Installation and Operation
1 Voltage/Selection indicator (two-color LED)
Dark:
Glows green:
Glows orange:
Flashes green: Server blade is switched on and selected for identification, or this
Flashes
orange:
Flashes green-
orange
Flashes green-
dark-orange
2 On/Off button fully compatible with the Advanced Configuration Power Interface
(ACPI)
If you press the On/Off button when the BX600 S2 or BX600 S3 basic unit is on (5 V
standby voltage is present) and the server blade is switched off, the power_up
command is sent to the management blade and the server blade is switched on.
If you press the On/Off button for less than 4 seconds when the server blade is
running, the power_off command is sent to the management blade and the server
blade is switched off by the management blade (graceful shutdown).
If you press the On/Off button for more than 4 seconds when the server blade is
running, the server blade is switched off immediately.
3 KVM/MP error indicator (two-color LED)
Dark:
Glows green:
Flashes
orange:
Flashes green-
orange:
4 KVM button (keyboard/video/mouse)
Pressing this button switches the keyboard, monitor and mouse to this server blade.
5 I/O status of the optional I/O module (green LED)
I/O Dark:
Green:
BX630 S2
The BX600 S2 or BX600 S3 basic unit is off, 5 V standby voltage
is not present, or the server blade is not installed properly.
Server blade is running.
Server blade is off but basic unit is running (5 V standby voltage is
present).
server blade is in a critical state.
Server blade is switched off and selected for identification, or this
server blade is in a critical state.
Server blade is in standby mode (ACPI function) or in a critical
state.
Server blade is in standby mode (ACPI function) and selected for
identification, or this server blade is in a critical state.
KVM has not been activated for this server blade.
KVM has been activated for this server blade.
KVM has not been activated for this server blade, and this blade
has been deactivated to save energy.
KVM has been activated for this server blade, and this blade has
been deactivated to save energy.
System is off or signal synchronization has failed.
System is switched on and online.
Operating Manual
Control and Connection Panel
33