Fujitsu BX630 - PRIMERGY - S2 Dual Operating Manual page 47

BIOS Setup
No Halt On Any Errors or Disabled
The system start is not aborted. If possible, the error is ignored.
SM Error Halt – error handling for system monitoring
Configures the system behavior during the self-test in the event of a
system monitoring error reported by the iRMC (e.g. fan monitoring,
temperature monitoring).
This setting only takes effect if the setting Halt On All Errors is selected
for POST Errors in the Boot Options menu.
Enabled
If the iRMC reports an error to the BIOS, the system start is
aborted and the system is stopped after the self-test.
Disabled
The system start is not aborted if the iRMC reports an error to the
BIOS. The error is only displayed.
Boot Diagnostic Screen
Defines whether the screen displays a logo instead of the start infor-
mation.
Enabled
The logo is displayed. If an error occurs or if you press the [F3] or
{Esc} key, the display switches to the start information.
Disabled
The start information is displayed on the screen.
Numlock
Defines the setting of the NumLock key after system start.
Auto The state of the NumLock key is not changed.
On The NumLock key is switched on.
Off The NumLock key is switched off.
Boot menu
Defines whether the pop-up Boot menu can be called with the [F12]
function key when the BIOS Setup is called during the POST (Enabled)
or not (Disabled).
Base Memory / Extended Memory
Indicates the size of the available main memory.
BX630 S2
Operating Manual
Main menu
47