Fujitsu BX630 - PRIMERGY - S2 Dual Operating Manual page 26

Installing the Server Blade in the Basic Unit
Installing the Server Blade
V
CAUTION!
Make sure you observe the safety notes and the information on handling
electrostatic-sensitive devices in the section
Sensitive Devices" on page
A
Figure 4: Inserting the server blade
26
19.
2
1
1
2
Operating Manual
Installing the Hardware
"Modules with Electrostatic-
I
Make sure you install the server
blade in the correct direction.
The control panel (A) must be at
the top.
Ê Undo the locking mechanism of the
handles of the server blade by first
pressing the green inside touch
points of the two handles (1) at the
same time.
Ê Then turn the locking handles
outward (2) into the unlocked
position.
Ê Hold the locking handles in the
unlocked position and push the
server blade as far as possible into
the slot.
BX630 S2