Installation And Operation - Fujitsu BX630 - PRIMERGY - S2 Dual Operating Manual

5

Installation and Operation

V
CAUTION!
Make sure you observe the safety notes in the
on page 17.
This chapter explains how to set up and operate the BX630 S2 scalable server
blade once you have installed it in the PRIMERGY BX600 S2 or BX600 S3 basic
unit.
– The position and function of the elements on the control and connection
panel of the server blade are described in section
– The different possible ways of switching the server blade on and off are
described in section
– Section 5.3 on page 35
ServerView Installation Manager.
– Section 5.4 on page 38
BX630 S2
5.2 on page 35.
explains how to configure the server blade with
explains how to update the server blade firmware.
Operating Manual
chapter "Important notes"
5.1 on page 32.
31