Fujitsu BX630 - PRIMERGY - S2 Dual Operating Manual page 10

Features
High availability and reliability
When memory data is accessed, 1-bit errors in the main memory are recog-
nized and automatically corrected with the ECC (Error Correcting Code)
method.
ASR&R (Automatic Server Reconfiguration and Restart) restarts the system in
the event of an error and automatically "hides" the defective system compo-
nents.
The PDA (Prefailure Detection and Analyzing) technology from Fujitsu
Technology Solutions analyzes and monitors all components that are important
for system reliability.
The onboard SAS RAID controller supports RAID levels 0 and 1 by default, thus
increasing the system's availability. If you are using SATA-II hard disk drives, you
can implement RAID levels 0 and 1 using Promise 20319 to increase the
system's availability.
Server management
Server management is implemented using the supplied ServerView software and
PDA technology. PDA reports the threat of a system error or overloading to the
system administrator in good time, so that preventive measures can be taken.
ServerView allows the management of all PRIMERGY servers in the network via
a central console. ServerView supports the following functions:
Monitoring of the ambient and CPU temperatures
Watchdog timer for Automatic Server Reconfiguration and Restart (ASR&R)
if memory modules or processors fail
Power monitoring
End-of-life monitoring of the fans with prefailure notification
Watchdog timer for monitoring the operating system and applications with
ASR&R
The supplied deployment software simplifies and speeds up the installation of
multiple servers. For further information see the relevant documentation.
For further information on the ServerView server management software see the
relevant documentation.
10 Operating Manual
Preface
BX630 S2