Hard Drive Cage - HP SignagePlayer mp8000r Maintenance And Service Manual
Maintenance & service guide: hp signageplayer mp8000r and mp8000s
Hide thumbs
Also See for SignagePlayer mp8000r:
- Illustrated parts and service map (4 pages) ,
- Getting started manual (36 pages)
Table of Contents
Advertisement
Hard Drive Cage
The drive cage sits behind the USB ports on the front of the chassis.
1.
Prepare the computer for disassembly
2.
Remove the computer access panel
3.
Remove the optical drive and connector
4.
Remove the hard drive
5.
Remove the two Torx T15 screws that secure the cage to the chassis (1), lift the tab (2) on the
hard drive cage, slide the cage toward the rear of the unit (3), and then pull the cage up and out
of the chassis.
Figure 7-26
To install the hard drive cage, reverse the removal procedures.
114
Chapter 7 Removal and Replacement Procedures Ultra-Slim Desktop (USDT) Chassis
(Preparation for Disassembly on page
(Computer Access Panel on page
(Hard Drive on page
Removing the hard drive cage
(Removing the Existing Optical Drive on page
110).
92).
99).
107).
Advertisement
Table of Contents
