Hard Drive Cage - HP EliteOne G5 Maintenance & Service Manual

Hard drive cage

The hard drive cage is located under the hard drive. It is secured with one Torx screw.
To remove the hard drive cage:
1. Prepare the computer for disassembly (see
2. Remove the access panel (see
3. Remove the rear port cover (see
4. Remove the stand (see
5. Remove the access panel (see
6. Remove the Torx screw (1) that secures the hard drive cage to the computer.
7. Remove the power supply cable from the clips around the hard drive cage (2).
8. Slide the hard drive cage away from the system board to disengage it from the clips, and then lift the
hard drive cage from the chassis (3).
To replace the hard drive cage, reverse the removal procedures.
Preparation for disassembly on page
Access panel on page
Removing the rear port cover on page
Stands on page 24).
Access panel on page
25).
23).
25).
23).
Hard drive cage 53