HP SignagePlayer mp8000r Maintenance And Service Manual page 123
Maintenance & service guide: hp signageplayer mp8000r and mp8000s
Hide thumbs
Also See for SignagePlayer mp8000r:
- Illustrated parts and service map (4 pages) ,
- Getting started manual (36 pages)
Table of Contents
Advertisement
11.
To place the hard drive carrier back in the chassis, align the guide screws with the slots on the
drive bay, drop the carrier straight down into the drive bay (1), and press the handle on the
carrier all the way down (2) so that the drive is properly seated and locked in place.
Figure 7-25
Installing the Hard Drive Carrier
12.
Replace the optical drive and reconnect the cable on the back of the optical drive.
13.
Replace the computer access panel.
14.
If the computer was on a stand, replace the stand.
15.
Reconnect the power cord and turn on the computer.
16.
Lock any security devices that were disengaged when the computer cover or access panel was
removed.
NOTE:
No configuration of the SATA hard drive is necessary; the computer automatically
recognizes it the next time you turn on the computer.
Hard Drive
113
Advertisement
Table of Contents
