System Board Drive Connections - HP SignagePlayer mp8000r Maintenance And Service Manual

CAUTION:
If you are inserting or removing a drive, shut down the operating system properly, turn off the
computer, and unplug the power cord. Do not remove a drive while the computer is on or in standby
mode.
Before handling a drive, ensure that you are discharged of static electricity. While handling a drive,
avoid touching the connector.
Handle a drive carefully; do not drop it.
Do not use excessive force when inserting a drive.
Avoid exposing a hard drive to liquids, temperature extremes, or products that have magnetic fields
such as monitors or speakers.
If a drive must be mailed, place the drive in a bubble-pack mailer or other protective packaging and
label the package "Fragile: Handle With Care."

System Board Drive Connections

Refer to the following illustration and table to identify the system board drive connectors.
Figure 6-26
Table 6-4
No. System Board Connector
1 Media Card Reader
2 SATA0
3 SATA1
4 SATA2
5 eSATA
60 Chapter 6 Removal and Replacement Procedures Small Form Factor (SFF) Chassis
To prevent loss of work and damage to the computer or drive:
System Board Drive Connections
System Board Drive Connections
System Board Label
MEDIA
SATA0
SATA1
SATA2
ESATA
Color
black
dark blue
white
light blue
black