Computer Setup-File - HP SignagePlayer mp8000r Maintenance And Service Manual

Table 3-1 Computer Setup (F10) Utility (continued)
Power
Advanced
Computer Setup—File
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 3-2 Computer Setup—File
Option
System Information
About
Set Time and Date
Flash System ROM
Replicated Setup
Default Setup
Description
Lists:
●
Product name
●
SKU number (some models)
● Processor type/speed/stepping
●
Cache size (L1/L2) (dual core processors have this listed twice)
●
Installed memory size/speed, number of channels (single or dual) (if applicable)
● Integrated MAC address for embedded, enabled NIC (if applicable)
●
System BIOS (includes family name and version)
●
Chassis serial number
●
Asset tracking number
● ME firmware version
●
Management mode
Displays copyright notice.
Allows you to set system time and date.
Allows you to update the system ROM with a BIOS image file located on a USB flash media device
or CD-ROM.
Save to Removable Media
Saves system configuration, including CMOS, to a formatted 1.44-MB diskette, a USB flash media
device, or a diskette-like device (a storage device set to emulate a diskette drive).
Restore from Removable Media
Restores system configuration from a diskette, a USB flash media device, or a diskette-like device.
Save Current Settings as Default
Saves the current system configuration settings as the default.
Restore Factory Settings as Default
Restores the factory system configuration settings as the default.
Computer Setup—Power on page 19
Computer Setup—Advanced on page 20
Computer Setup (F10) Utilities
11