HP SignagePlayer mp8000r Maintenance And Service Manual page 27

Table 3-4 Computer Setup—Security (continued)
●
Slot Security Allows you to disable any PCI or PCI Express slot
Network Service
Enables/disables the computer's ability to boot from an operating system installed on a network
Boot server. (Feature available on NIC models only; the network controller must be either a PCI
expansion card or embedded on the system board.)
System IDs
Allows you to set:
●
●
●
●
DriveLock Security Allows you to assign or modify a master or user password for hard drives. When this feature is
enabled, the user is prompted to provide one of the DriveLock passwords during POST. If neither is
successfully entered, the hard drive will remain inaccessible until one of the passwords is
successfully provided during a subsequent cold-boot sequence.
NOTE:
is attached to the system.
See the Desktop Management Guide for more information.
◦
USB Port 11
◦
USB Port 12
Accessory USB Ports
◦ USB Port 1
◦
USB Port 2
Asset tag (18-byte identifier), a property identification number assigned by the company to the
computer.
Ownership tag (80-byte identifier) displayed during POST.
Chassis serial number or Universal Unique Identifier (UUID) number. The UUID can only be
updated if the current chassis serial number is invalid. (These ID numbers are normally set in
the factory and are used to uniquely identify the system.)
Keyboard locale setting (for example, English or German) for System ID entry.
This selection will only appear when at least one drive that supports the DriveLock feature
Computer Setup (F10) Utilities
17