Removing An External 5.25-Inch Drive - HP SignagePlayer mp8000r Maintenance And Service Manual

Maintenance & service guide: hp signageplayer mp8000r and mp8000s
Hide thumbs Also See for SignagePlayer mp8000r:
Table of Contents

Advertisement

Removing an External 5.25-inch Drive

CAUTION:
computer.
To remove a 5.25-inch external drive:
1.
Prepare the computer for disassembly
2.
If the computer is on a stand, remove the computer from the stand.
3.
Remove the access panel
4.
Rotate the drive cage to its upright position.
Figure 6-27
5.
If removing an optical drive, disconnect the power cable (1) and data cable (2) from the rear of
the optical drive.
Figure 6-28
All removable media should be taken out of a drive before removing the drive from the
(Computer Access Panel on page
Rotating the Drive Cage Up
Disconnecting the Power and Data Cables
(Preparation for Disassembly on page
43).
35).
Drives
61

Advertisement

Table of Contents
loading

This manual is also suitable for:

Signageplayer mp8000s

Table of Contents