ScanSoft TEXTBRIDGE PROFESSIONAL EDITION 8.5 User Manual page 90

To queue up and process on-line page images, use the following
procedure:
1. On the TextBridge Pro main toolbar, depress the Input
From File button.
Make sure that the Save Page Image – Defer OCR button is no
longer depressed.
2. Prepare the job.
For complete information, refer to "Preparing the Job" earlier in
this chapter.
In particular, three job preferences can be important for
processing on-line image files. If files contain fax-quality (100-by-
200, 200-by-100, or 200-by-200 dots per inch) images, choose the
Automatic or Fax setting in the Original Quality category.
Also, if you are unsure of the orientation of the pages in the image
files, choose the Automatic setting from the Page Orientation
category.
Finally, if you are not sure how many columns the page images
have, click the Automatic setting in the Input Layout category.
3. On the TextBridge Pro main toolbar, click the Go button.
TextBridge Pro displays the Image Queue dialog box (Figure 4–5),
where you can locate and specify image files for processing.
Using TextBridge Pro
4–21