ScanSoft TEXTBRIDGE PROFESSIONAL EDITION 8.5 User Manual page 161

A–16
1082 TextBridge Pro could not open the scanner. Check to see
that the scanner is on and ready and that sufficient
memory is allocated to TextBridge Pro. Otherwise, the
selected TWAIN source cannot drive the attached
scanner(s).
Make sure that the scanner is powered on and ready. Quit
TextBridge Pro and use the Get Info command to make sure that
enough memory is allocated to TextBridge Pro. Some TWAIN
sources require more memory than others to acquire an image.
1083 The scanner driver is out of memory.
Quit TextBridge Pro and use the Get Info command to make sure
that enough memory is allocated to TextBridge Pro. Some
scanner drivers require more memory than others to acquire an
image.
1084 The scanner's sheet feeder is empty. Load a document and
try again.
Add pages to the sheet feeder and try again.
1085 The scanner's sheet feeder is jammed. Clear the paper
path and try again.
Follow the manufacturer's instructions to clear the paper path
and try again.
1086 The scanner's sheet feeder is open. Close the sheet feeder
and try again.
The scanner is not ready. Close the sheet feeder and try again.
TextBridge Professional Edition User's Guide