ScanSoft TEXTBRIDGE PROFESSIONAL EDITION 8.5 User Manual page 156

1051 TextBridge Pro cannot invert an image because
TextBridge Pro is not in Preview mode.
While running TextBridge Pro from AppleScript, the script tried
to invert an image when TextBridge Pro was not in preview
mode. This capability is only available in preview mode.
1052 TextBridge Pro cannot deskew an image because
TextBridge Pro is not in Preview mode.
While running TextBridge Pro from AppleScript, the script tried
to deskew an image when TextBridge Pro was not in preview
mode. This capability is only available in preview mode.
1053 TextBridge Pro is unable to add a zone. There are already
999 zones which is the limit.
Only 999 zones can be defined for each page.
1054 TextBridge Pro cannot add a zone. Please refer to
Appendix A of the TextBridge Pro User's Guide for
troubleshooting tips.
Restart TextBridge and try again. Please refer to the
troubleshooting tips in this chapter. If the problem reoccurs
contact us at our website at www.textbridge.com for FAQ's
(Frequently Asked Questions), TIB's (Technical Information
Bulletins) and more.
1055 TextBridge Pro cannot select a zone. Please refer to
Appendix A of the TextBridge Pro User's Guide for
troubleshooting tips.
Restart TextBridge and try again. Please refer to the
troubleshooting tips in this chapter. If the problem reoccurs
contact us at our website at www.textbridge.com for FAQ's
(Frequently Asked Questions), TIB's (Technical Information
Bulletins), and more.
Troubleshooting and Error Messages
A–11