ScanSoft TEXTBRIDGE PROFESSIONAL EDITION 8.5 User Manual page 36

W G
HERE TO O
2–12
If you are using a TWAIN source to drive your scanner, you may
also choose whether or not to display the TWAIN user interface
when scanning from TextBridge Pro. In most cases it is best to
display the interface; however, scanner settings will be grayed out
in the TextBridge Main window.
6. Click OK to close the Select Source dialog box.
If TextBridge is not able to find your scanner, restart your system
with the scanner turned on, and try selecting the scanner again.
7. Begin using TextBridge Pro.
TextBridge Pro automatically selects Scanner as the input source,
using the driver selected in Step 5.
When using an ISIS driver, if the scanner is grayed out, or if you
Note
previously installed and selected a TWAIN source for use with
TextBridge Pro, you must also use the Select Source command on
the Scanner menu to select the Chooser extension driver.
F H
ROM ERE
With TextBridge Pro fully installed and registered, you are ready
to begin using the product.
Please refer to Chapter 5 of this guide. It provides step-by-step
tutorial sessions designed to help you learn some of the important
features of TextBridge Pro.
TextBridge Professional Edition User's Guide