ScanSoft TEXTBRIDGE PROFESSIONAL EDITION 8.5 User Manual page 159

A–14
1076 A fatal scanner error occurred. Quit and restart
TextBridge Pro.
Turn the scanner off and on again. Then, quit and restart
TextBridge Pro.
1077 An error occurred while scanning.
Check your scanner; try changing the resolution and try again.
Also, refer to "Scan Problems" in this chapter for troubleshooting
tips.
1078 There is no scanner driver installed or selected. Install
and/or select a scanner driver for your scanner.
TextBridge Pro cannot find a scanner driver.
If you are using a TWAIN driver and if the error was a result
of an attempt to open the Select Source dialog box:
Make sure the TWAIN folder is installed in the Preferences
folder in the System Folder.
Make sure the Source Manager is installed in the TWAIN
folder.
Make sure there is an appropriate TWAIN data source in the
TWAIN folder.
Verify that the scanner works with its own software.
If you are using an Adobe Photoshop Import Plug-in and if
the error was a result of an attempt to open the Select Source
dialog box:
Make sure the Plug-in is installed in the appropriate folder,
according to the scanner manufacturer's instructions.
Verify that the scanner works with its own software.
TextBridge Professional Edition User's Guide