ScanSoft TEXTBRIDGE PROFESSIONAL EDITION 8.5 User Manual page 150

–151 There is not enough system memory available.
This message can also indicate that other applications are using
memory or that more RAM is required.
Quit all applications and restart your system. Then restart
TextBridge Pro and try again.
–192 A required resource is missing.
Either a resource critical to the operation of TextBridge Pro is
missing, or there may be a conflict caused by an extension. To
determine whether there is a conflict, restart your Mac while
holding down the Shift key. If that doesn't work, Quit TextBridge
and reinstall from the TextBridge CD-ROM.
–1701 A required parameter is missing from the AppleScript
command.
Refer to Appendix C, "AppleScript Interface," of the User's Guide.
1002 An unexpected MacOS error has occurred.
Quit TextBridge pro and restart your system. Then restart
TextBridge Pro and try again.
If the error occurs persistently, please contact our website at
www.textbridge.com for FAQ's (Frequently Asked Questions),
TIB's (Technical Information Bulletins), and more. This error
may require Customer support.
1003 TextBridge Pro is missing a resource. Reinstall from the
TextBridge Pro CD-ROM.
You are trying to start TextBridge and a critical resource is
missing or cannot be found.
Reinstall TextBridge from the TextBridge Pro CD-ROM. Refer to
Chapter 2, of this manual for information about installing
TextBridge Pro.
Troubleshooting and Error Messages
A–5