ScanSoft TEXTBRIDGE PROFESSIONAL EDITION 8.5 User Manual page 155

A–10
1035 TextBridge Pro cannot stop performing OCR because the
process has not started.
While running TextBridge Pro from AppleScript, the script tried
to stop processing when no OCR job was in progress.
1036 TextBridge Pro cannot cancel a page because no page is
being recognized currently.
While running TextBridge Pro from AppleScript, the script tried
to cancel the current page when no page was being recognized.
1037 TextBridge Pro does not have enough memory to display
an image.
You have directed TextBridge Pro to read a large or high-
resolution image without sufficient RAM available. Try quitting
all other applications and try again. Or if possible, reduce the
image resolution. You may need to install additional RAM on
your system.
1038 TextBridge Pro cannot rescan the page. Rescan is
available only in Preview mode, when showing a scanned
image.
While running TextBridge Pro from AppleScript, the script issued
a Rescan command when TextBridge Pro was not in preview
mode.
1039 TextBridge Pro does not have enough memory to zoom the
page image.
This message indicates that the maximum zoom factor has been
reached.
1040 TextBridge Pro cannot set the property while in the
current mode.
While running TextBridge Pro from AppleScript, the script
attempted to set an inappropriate property for the current
TextBridge Pro status.
TextBridge Professional Edition User's Guide