Xerox PAGIS PRO 2.0 User Manual page 37

Find and select your
scanner
Click ISIS only or TWAIN
only to narrow the list
2–10
Contents
Figure 2–5. Select Scanner dialog box
11. Find and select your scanner in the list, and if necessary
configure it to use the correct scanner settings. When you
are done, click OK in the Select Scanner dialog box.
Most new scanners and digital cameras have TWAIN drivers,
which are provided by the manufacturer. Pagis Pro also provides
a number of ISIS drivers, mainly for older scanners.
If you have at least one TWAIN scanner driver installed on your
system, this dialog box defaults to displaying only TWAIN
scanner drivers.
If no TWAIN scanner drivers are found, this dialog box loads the
built-in ISIS scanner drivers.
Select a driver for your scanner, either TWAIN or ISIS, as
appropriate. Click the Configure button to specify additional
settings.
For TWAIN, you can click the Configure button to specify
whether the TWAIN scanner interface or the Pagis scanner
interface is to be used with your scanner.
Pagis Pro User's Guide
Index
Click when
done
Click to
configure
the driver