Table of Contents
Advertisement
Windows NT 4.0:
a. Select "Modify" and click "Next."
b. The Select Components screen will launch. Remove the check from the check box in front
of each component that you wish to remove. Do not remove the check from the box in
front of the RAID Device Drivers component unless you intend to remove the device
drivers.
✏
NOTE
If you remove the device drivers and you are booting to a host drive, you will be unable to reboot
back into Windows. The operating system will be inaccessible. Click "Next."
c. A Question Box will appear if you have deselected Storage Console(s). Click "Yes" to
continue the uninstall.
d. The InstallShield Wizard Complete window is displayed. Click "Finish" to close the
window.
5. After file removal finishes, reboot the computer to complete the uninstall.
Loading the StorCon Program Under Windows 95/98
The StorCon program for Windows 95/98 is part of the Intel RAID Controller SRCU31 System
CD-ROM. To load the program under Windows 95/98, type the following command at the prompt:
StorCon <Enter>
✏
NOTE
To monitor the server(s) remotely using StorCon, load MON4SOCK.DLL in the same directory as
StorCon. It supports SPX
MON4NETB.DLL).
Loading StorCon Under Linux
The Intel RAID Controller SRCU31 System CD-ROM for Linux includes the archive:
•
StorCon.tgz, StorCon, and object files (Intel)
•
This archive includes all object files to create StorCon, as well as an executable StorCon
compiled on a current Linux version
Load StorCon by typing the following at the prompt:
StorCon <Enter>
✏
NOTE
To monitor the server(s) remotely using StorCon, load MON4SOCK.DLL in the same directory as
StorCon. This DLL supports SPX/IPX and TCP/IP network protocols (for NetBIOS you can load
instead MON4NETB.DLL).
82
†
/IPX and TCP/IP network protocols (for NetBIOS you can load instead
Intel RAID SRCU31 Users Guide
Advertisement
Table of Contents
