Step 3: Set Target Project Information; Step 4: Set Capture Settings (Optional) - Novell ADMINSTUDIO 9.5 User Manual

Chapter 7: Repackaging Legacy Installations Using the Repackaging Wizard
Repackaging Legacy Installations Using the Repackaging Wizard

Step 3: Set Target Project Information

In this step, you identify the location where you want files created by Repackager to be stored.
Task: To set target project information:
1. On the Collect Product Information Panel, click Next. The Set Target Project Information and Capture
Settings Panel opens.
2. Click the Browse (
want the Repackaging Wizard to place its output, including the Repackager project file (
Repackaging Wizard output files, and source files.
You can also enter the name of a new folder in the Project path to store files field, and you will be prompted
to create it when you exit this panel.
3. Continue with

Step 4: Set Capture Settings (Optional)

From the Set Target Project Information and Capture Settings Panel, you can specify capture types for the
repackaging session such as files, .ini files, shortcuts, and Registry data. You can also restrict directory analysis to
specific directories, which can significantly improve repackaging performance.
•
If you want to modify the default capture
•
If you do not want to modify the default capture
Beginning the Repackaging
480
) button next to the Project path to store files field and select the directory where you
Step 4: Set Capture Settings
Process.
(Optional).
settings, perform the following steps.
settings, click Next and continue with
ADS-0950-UG00
), the
.irp
Step 7:
AdminStudio 9.5 User Guide