Chapter 6: Managing Application Catalog Databases
Sharing Application Catalog Data
16.
Verify that the operation is reported as successful, as shown below:
Step 3: Creating the Publication (Running the Script)
To create the Publication, run the Publication script by performing the following steps:
Task:
To create the Publication:
1.
Open the script created in
2.
Replace this code:
@identityrangemanagementoption = N'auto', @pub_identity_range = 10000,
@identity_range = 1000, @threshold = 80
with this code:
@identityrangemanagementoption = N'auto', @pub_identity_range = 5000000,
@identity_range = 5000000, @threshold = 80
3.
Save the changes. There should be approximately 281 changes.
4.
Run the script against the Publisher Database (created in
5.
Verify that the script runs without any errors or warnings.
6.
Verify that a new publication is listed under Replication/Local Publications, as shown below. If no
publication is listed, then refresh the Replication node.
296
Step 2: Generating the Publication Script for the Publisher Database
Step 1: Creating the Publisher
ADS-0950-UG00
in a text editor.
Database)
AdminStudio 9.5 User Guide