Table of Contents
Advertisement
Chapter 7: Repackaging Legacy Installations Using the Repackaging Wizard
Repackaging Legacy Installations Using the Repackaging Wizard
2.
Click Finish to close the Repackaging Wizard.
3.
Continue with
Step 3: Install Setup and Make Manual System Changes
In this step, you will manually launch the installation of the application you are repackaging, and then you will make
any manual changes to the system that you want captured in the Windows Installer package.
Task:
To install setup and make manual system changes:
1.
Launch the installation program of the application you are repackaging.
2.
Follow the prompts until the installation has completed.
3.
When the installation is complete, make any additional changes to the system (such as deleting files and
shortcuts) that you want to be recorded in this repackaged installation.
4.
Launch the Repackaging Wizard again. The Welcome Panel opens.
5.
Click Next. The Method Selection Panel opens.
6.
Select Snapshot and click Next. The Snapshot Method Panel opens with Multiple Steps already
selected, and the Analyze system status changes option now enabled and selected.
7.
Continue with
Step 4: Entering Product Information
In this step, you will enter product information for the application that you just installed.
470
Step 3: Install Setup and Make Manual System
Step 4: Entering Product
Changes.
Information.
ADS-0950-UG00
AdminStudio 9.5 User Guide
Advertisement
Table of Contents
Troubleshooting
