CARLO GAVAZZI WM4-96 - PROGRAMMING Manual page 39

Counters Management
MULTI TARIFF
This function allows the management of the counters
according to many periods per day and three periods per
year: WINTER, SUMMER and HOLIDAY.
S
S
S
HOLIDAY period, follow the procedure on page 37 from
step 11 to step 17.
The WINTER and SUMMER periods are conven-
tional seasons mainly used to manage in the best
way the different energy costs during the year.
The reminds at steps a), b), c), d) on page 36 and
37 are also valid for the MULTI TARIFF function. The next
page shows a few examples of programming the various
time periods.
Dual tariff prog.
35
To program the parameters relat-
ing to the winter season, simply
follow the same procedure (holi-
days) described on page 37 from
F
Step 11 to Step 17. The parame-
ters of the SUMMER season are
automatically set by the instru-
ment as a difference between
F
the previous two periods of the
Year. To enable the setting of the
daily time periods, press
when the WINTER or SUMMER
seasons are highlighted. The fol-
lowing settings are the same as
F
the ones described from Step 1
to Step 9 on page 35 and 36. To
reset your choices and/or go
back to the previous menus, use
the
34
F
key. To program the
Installed power
43
39
S
41