CARLO GAVAZZI WM4-96 - PROGRAMMING Manual page 15

Displaying of the variables
Control type:
alarm (e.g.: A2),
diagnostics (e.g.: D1),
maximum value (MAX),
minimum value (MIN).
Date of the
event.
To reset all the events press the
reset procedure press the
reset procedure press the
Pass "999": display of energy consumption storage
(Only if the RS232+RTC is present)
The RS232+RTC module allows the user to display the storage
of the energy consumption of the previous two months. To enter
this function, press the
Use the
F
press the
Load profile
13
Time of the
event.
S
key in any one of the measuring page
and keys to display the partial values;
key to exit.
8
Only for alarms and diag-
nostics: detection of the
abnormal condition (ON) or
return to the normal condi-
tion (OFF)
controlled.
S
key, to continue the
S
key again: to exit from the
F
key.
(excluded the "load profiles"),
when the instrument asks for the
pass code
set the value "999": the instru-
ment shows you the page where
the energy values are stored.
Input programming
16
15
Variable being
Alarms: value of
the ON alarm;
Max and Min log-
ging: maximum
and minimum
measured values.
,
19