CARLO GAVAZZI WM4-96 - PROGRAMMING Manual page 11

Displaying of the variables
Harmonics:
This angle is displayed only if the measurements
are taken in a three-phase system with neutral
Pages relating to the energy meters
Page "25" (3 without measuring input module)
Displaying of the total energy meters
F
key disabled.
Page "26" (4 without measuring input module)
Displaying of partial energies
F
key is active; modification of tariff/displayed period.
By pressing the
to the season is highlighted. By using the
it's possible to change the season displayed in that page.
Pressing the
period is highlighted. Using the
sible to change the tariff period within the displayed season.
Pressing the
measuring page.
The changes of season and tariff period only refer to the dis-
playing of the values stored in the corresponding season
and period.
The changes carried out in this page do not have any
influence on the method of tariff management of the
instrument; they are only valid for display purposes.
Displaying of min/max values
9
F
key for the first time, the range relating
F
key once again, the range relating to the
F
key for the third time, you go back to the
8
0°
Generated
270°
Imported
180°
and
16
11
90°
and keys,
keys, it's pos-
Pass 999
15