Modem - CARLO GAVAZZI WM4-96 - PROGRAMMING Manual

50
Outputs / Other settings
S
S
S
phone numbers to be managed (from 1 to 5) by the
keys and confirm it with
2- PASSWORD: not available.
3- ALARMS: enables the user to prepare an alarm message
and send it to a remote PC, when an alarm changes status
(activation or deactivation) among the selected ones. Select
ALARMS by means of the
S
with . The window with the available alarms appears:
select the alarm that is to be activated (ON) or deactivated
(OFF) by means of the
firm it with
management of the analogue modem is enabled
as "passive" mode (WM4 answers to a request from the
remote PC) or as "active" mode (WM4 signals the change of
status of one of the alarms to the remote PC). To enable the
"active" mode, it's necessary to activate the alarms to be
transmitted and set how many phone numbers are to be
Digital outputs
45
F
F
S
. Selecting the modem function, the
44

Modem

The instrument communi-
cates with a remote PC by an
analogue modem.
Select MODEM from the RS232
sub-menu by means of the
and keys and confirm with
S
. The window with the
modem settings appears:
1- PHONE NUMBER: select it
using the
confirm it with
the required quantity of pre-set
S
.
and
and
How to use SMS
55
and keys and
S
. Then, select
keys and confirm it
keys and con-
and
52