CARLO GAVAZZI WM4-96 - PROGRAMMING Manual page 35

S
S
S
S
1.2..
..2.1
S
S
1.2..
..2.1
S
S
1.2..
..2.1
S
F
Proceed with the
same principle for
the following rows.
To exit any item
always use
Graphs, AVG calcul.
33
Counters Management
F
F
F
.
34
S
1-press : the first box (trf=tar-
iff) is highlighted;
S
2-press again: the TARIFF box
will appear on the lower part of the
display; now you can choose the
tariff (from 1 to 4), e.g.: "1" by means
of the and
3-press the
the "end tariff" hour is highlighted;
S
4-press the
HOURS box will appear on the
lower part of the display; now you
can choose the hours - e.g. 8 - by
means of the
S
5-press the
tariff" minutes will be highlighted;
S
6-press the
UTES box will appear on the lower
part of the display; now you can set
the desired minutes - e.g. 10 - by
means of the
7-after the confirmation of the last
setting, press
to the selection of the first "trf"
parameter you have highlighted.
The "starting hour" of the following
line becomes equal to the "end
hour" you have just selected. Only
when the "trf" parameter is high-
lighted, you can scroll the parame-
ters and modify them: use the
S
key to access to the parame-
43
35
keys;
S
key once more,
key once more; the
and keys.
key again; the "end
key again: the MIN-
and keys.
S
and you are back
Multitariff counters
39