The Display Page; Variables - CARLO GAVAZZI WM4-96 - PROGRAMMING Manual

Displaying of the variables
How to scroll the various pages
To scroll the various pages, use the
Pressing the
you access to the programming phase. The
on the contrary, has various functions depending on the
selected page.
How the
on the display page.
Pages from "00" to "13" (00 only without measur-
ing input module). Displaying of the variables
F
key enabled if the alarm latch function is activated,
access to the reset of the latch alarms. To reset the latch
alarm press the
play: " WILL YOU RESET THE LATCH ALARMS?"; If you
S
choose
F
choose there won't be any reset. The reset of the latch
alarm is only available if the alarm event is finished.
Pages from "14" to "18" (from 01 to 02 without
measuring input module). Displaying of the "MIN"
and "MAX" values.
F
The
the reset function of the "MIN" and "MAX" values. To reset
the "MIN/MAX" recording, proceed as follows: enter the
function by pressing the
appear: "WILL YOU RESET MIN/MAX VALUES? WILL YOU
CONTINUE?"; if you choose
if you choose
keys allow you to select the range/value that you want
to reset; to confirm the reset press the
the function press the
Front panel
7
S
F
key changes function depending
F
key; after that the instrument will dis-
you will enable the reset procedure, if you
key is active, that means you have access to
S
the reset will not be made. The
F
8
key in any one of the display pages,
F
key, after that a message will
F
there won't be any reset,
S
key again.
16
9
and keys.
F
key again. To exit
Load profiles
key,
and
13