Update The Publishing Directory - Netscape MANAGEMENT SYSTEM 6.0 Installation And Setup Manual

Using the Default Demo
Click OK.
6.
Certificate Management System can now publish user certificates in the
configuration directory. You do not need to configure the Publisher or Rule. If you
want to see more about how the rule works, look at the
Rules (using the Edit/View button) and the
Publishers.

Update the Publishing Directory

Your Certificate Manager is now configured to automatically publish newly issued
client certificates. If you want to experience this, you can follow the instructions in
"Step 2. Add a User to the Directory" and "Step 3. Enroll with Directory-Based
Authentication" again to add a new user and enroll for a certificate.
Use the procedure in this example to view the new user's directory entry and see
the certificate published automatically (certificates are published every 20 minutes,
so you may need to wait a few minutes before a new certificate is published).
In the example here, you conclude by manually updating the directory with the
issued (but unpublished) certificate for User Two. You will look at User Two's
directory entry before and after publishing to see how the entry changes.
To view the directory entry for User Two:
Go to the Netscape Console main window, select the configuration directory
1.
(
Click the Directory tab.
2.
The directory information trees are represented in the navigation tree on the
left.
Open the entry for your domain (for example,
3.
Select the People node in the entry for your domain.
4.
The right side of the window lists the People entries. (If you have followed the
examples, User Two will be the only entry.)
Double-click the User Two entry to open the Edit Entry dialog box.
5.
Click Advanced at the bottom of the dialog box to see all of the attributes for
6.
User Two in the Property Editor dialog box.
User Two has attributes for Email address, First name, etc., but no certificate.
152 Netscape Certificate Management System Installation and Setup Guide • March 2002
) in the navigation tree, and then click Open.
configDir
LdapUserCertRule
LdapUserCertPublisher
).
example.com
under
under