Installing A Online Certificate Status Manager - Netscape MANAGEMENT SYSTEM 6.0 Installation And Setup Manual

Stage 2. Running the Installation Wizard
Single Sign-on Summary. Check the summary and select whether to retain or
26.
delete the
The single signon password simplifies the way you subsequently sign on to
Certificate Management System by storing the passwords for the internal
database, tokens, and so on. Each time you log on, you're only required to
enter this single password. (For details, see "Required Start-up Information"
on page 307.)
Click Next to continue.
Configuration Status. This screen should indicate that your configuration has
27.
been successful.
Click Done to exit the Installation Wizard.
Proceed to the next step, "Stage 3. Enrolling for Administrator/Agent
28.
Certificate" on page 271, to create the first agent for the Data Recovery
Manager.

Installing a Online Certificate Status Manager

To install a standalone Online Certificate Status Manager:
Subsystems. Select Online Certificate Status Manager.
1.
Click Next to continue.
Network Configuration. Type the numbers for the ports to be used by the
2.
CMS instance. Be sure to leave the "Enable" checkbox for the non-SSL
end-entity port selected. The OCSP-compliant clients will use this port to
communicate with the Online Certificate Status Manager.
Click Next to continue.
Key-Pair Information for Online Certificate Status Manager Signing
3.
Certificate. Select the token to store the Online Certificate Status Manager
signing certificate and key pair. If you have not previously initialized the
token's password, you must do so in this screen. Also specify the key type and
length.
Click Next to continue.
260 Netscape Certificate Management System Installation and Setup Guide • March 2002
file.
password.conf