Changing The Name Of An Instance - Netscape MANAGEMENT SYSTEM 6.0 Installation And Setup Manual

Version. The version number.
Build Number. The number that identifies the build that was used for this
installation.
Security Level. The server's security level—whether the server is meant for use
in the United States and Canada (domestic) or any other part of the world
(export). (See "Configuring the Server's Security Preferences" on page 459.)
Server Status. The server's status—whether it is
unknown
properly.

Changing the Name of an Instance

Following installation, the name of a CMS instance is in the form:
(
CMS
Certificate Management System. You first specified this when you installed this
server.
For example, if you installed an instance of Certificate Management System with
an ID of
You can change the instance name to a more descriptive one later. If you change
the instance name, Certificate Management System uses the new name as a
descriptive nickname for the instance. It shows the new name in Netscape Console
only; it does not change the original instance ID in the configuration.
To change the name of a particular CMS instance:
Log in to Netscape Console (see "Logging In to Netscape Console" on
1.
page 326).
In the Console tab, select the CMS instance you want to rename.
2.
Click Edit.
3.
Details about the selected CMS instance appear in the right pane. Specify the
appropriate information:
Server Name. Type a descriptive name for the server.
Description. Type any additional description for the server. For example, you
may want to type information that will help you identify this instance of
Certificate Management System.
; normally,
unknown
cert-<instance_id>
, the instance name will be
testCA
indicates that the server hasn't been configured
), where
<instance_id>
cert-testCA
Chapter 7
Changing the Name of an Instance
,
started stopped
is the ID for this instance of
.
Installing and Uninstalling CMS Instances
, or
301