Netscape MANAGEMENT SYSTEM 6.0 Installation And Setup Manual page 403

Click OK.
4.
You are returned to the Manage User Certificates window. The certificate you
imported should now be listed in this window.
To view the certificate you imported, select it and click View.
5.
The certificate information appears. Verify that the certificate you added is the
correct one.
Click Done.
6.
You are returned to the Users tab.
Step 4. Check the Certificate Database for the CA Certificate
The issuer of the Registration Manager's certificate that you added in Step 3 must
be trusted by the subsystem that services certificate requests approved by the
Registration Manager. Make sure that this CA's certificate exists in the subsystem's
certificate database (internal) and that it is trusted. To check whether the CA's
certificate exists in the subsystem's certificate database, follow the instructions in
"Viewing the Certificate Database Content" on page 482.
• If the CA certificate isn't listed, follow the instructions in "Using the Wizard to
Install a Certificate or Certificate Chain" on page 452 and add the certificate to
the certificate database.
• If the CA's certificate is listed but untrusted, follow the instructions in
"Changing the Trust Settings of a CA Certificate" on page 485 and change the
trust setting to trusted.
Chapter 13 Managing Privileged Users and Groups
Setting Up Privileged Users
403