Stopping From The Command Line; Stopping From The Windows Nt Services Panel; Restarting Certificate Management System - Netscape MANAGEMENT SYSTEM 6.0 Installation And Setup Manual

Restarting Certificate Management System

Stopping From the Command Line

You can stop a CMS instance running on a local host by entering the appropriate
command at the command prompt. To stop a Certificate Management System from
the command line:
Open a terminal window to your server.
1.
In a Unix system, log in either as
2.
is how you started the server).
At the command-line prompt, enter the following line:
3.
<server_root>/cert-<instance_id>/stop-cert[.bat]
.bat
on a Windows system.

Stopping From the Windows NT Services Panel

You can stop a CMS instance running on a local host by stopping the
corresponding service; it is identified by the following in the Windows NT Services
panel:
To stop Certificate Management System from the Windows NT Services panel:
Click the Start button on your desktop, and from Settings, select Control Panel.
1.
In the Control Panel window, select Services.
2.
Select the CMS instance and click Stop.
3.
When prompted, click Yes.
4.
Restarting Certificate Management System
Whenever you change the CMS configuration, you must save your changes (by
clicking the Save button) for the changes to take effect. Some configuration changes
also require that you restart the server after you save the changes. If restarting is
required, the server prompts you accordingly.
You can restart the server in several ways.
312 Netscape Certificate Management System Installation and Setup Guide • March 2002
specifies the file extension; this is required only when running the utility
Netscape CMS (<instance_id>
or using the server's user account (if that
root
)