Starting From The Windows Nt Services Panel; Stopping Certificate Management System - Netscape MANAGEMENT SYSTEM 6.0 Installation And Setup Manual
Hide thumbs
Also See for NETSCAPE MANAGEMENT SYSTEM 6.0:
- Manual (302 pages) ,
- Installation and migration manual (66 pages) ,
- Administrator's manual (470 pages)
Table of Contents
Advertisement
Stopping Certificate Management System
Starting From the Windows NT Services Panel
If you have installed Certificate Management System on a Windows NT system,
you can start the server (as a service) from the Windows NT Services panel (see
Figure 8-1). The CMS service has the following name:
Netscape CMS (<instance_id>)
Figure 8-1
To start Certificate Management System from the Windows NT Services panel:
Click the Start button on your desktop.
1.
Select Control Panel from Settings.
2.
In the Control Panel window that appears, click Services.
3.
Select the CMS instance and click Start.
4.
Stopping Certificate Management System
You can stop Certificate Management System in several ways.
If the
page 306), Certificate Management System can be stopped in the following ways
and you will not be prompted to enter any password:
•
From Netscape Console (locally and remotely)
•
From the command line (locally only)
•
On a Windows system, from the Windows Services panel (locally only)
310
Netscape Certificate Management System Installation and Setup Guide • March 2002
CMS service in the Windows NT Services panel
file is present ("Significance of password.conf File" on
password.conf
Advertisement
Table of Contents
