Netscape MANAGEMENT SYSTEM 6.0 Installation And Setup Manual page 754

Configuring CMS Logs
Figure 23-1
After installation, you must verify whether you want to use these listeners, check
how these listeners are configured, and make the appropriate configuration
changes.
You can modify a log-event listener by editing its configuration parameter values;
you cannot edit the name of a listener. To change the name of a listener, you need
to create a new listener exactly like the listener you want to rename, except with a
new name, and delete the old listener.
As a part of editing a listener, you can change its status from enabled to disabled or
vice versa by checking or unchecking the
a disabled state do not record any events.
If you don't want to use a listener, delete it from the configuration as explained in
"Step 3. Delete Unwanted Listeners" on page 755; alternatively, you may keep it in
the disabled state. If you want to create a new listener, you can do so as explained
"Step 4. Create New Listeners" on page 756.
To configure audit, error, and system logs for a CMS instance:
Log in to the CMS window (see "Logging In to the CMS Window" on
1.
page 333).
754 Netscape Certificate Management System Installation and Setup Guide • March 2002
Default log-event listeners of a Certificate Manager
parameter. Listeners that are in
enabled