Netscape MANAGEMENT SYSTEM 6.0 Installation And Setup Manual page 125

At this point the system configures the internal database, which can take some
time.
CA's serial number range. Click Next to accept the default (start at 0x1 with no
7.
upper limit).
Internal OCSP Service. Click Next to accept the default (the option is selected).
8.
Network Configuration. Enable the non-SSL end-entity gateway and then
9.
accept the default values listed below. If one of the default ports is unavailable,
a different, randomly selected port will appear in the form.
SSL administration port:
SSL agent port:
8100
SSL end-entity port:
Enable: Select this checkbox to enable the non-SSL end-entity gateway.
Non-SSL end-entity port:
8200
443
80
Installing the Default Demo
Chapter 3 Default Demo Installation 125