Update The Publishing Directory - Netscape MANAGEMENT SYSTEM 4.5 Installation And Setup Manual

Using the Default Demo
Change the
5.
O=<your domain>.<domain>
This pattern will cause the mapper to formulate a DN using the user ID from
the certificate request (the data entered in the User ID field on the end entity
enrollment form) and fixed values for OU and O.
Click OK.
6.
Certificate Management System can now publish user certificates in the
configuration directory. You do not need to configure the Publisher or Rule. If you
want to see more about how the rule works, look at the
Rules (using the Edit/View button) and the
Publishers.

Update the Publishing Directory

Your Certificate Manager is now configured to automatically publish newly issued
client certificates. If you want to experience this, you can follow the instructions in
"Step 2. Add a User to the Directory" and "Step 3. Enroll with Directory-Based
Authentication" again to add a new user and enroll for a certificate.
Use the procedure in this example to view the new user's directory entry and see
the certificate published automatically (certificates are published every 20 minutes,
so you may need to wait a few minutes before a new certificate is published).
In the example here, you conclude by manually updating the directory with the
issued (but unpublished) certificate for User Two. You will look at User Two's
directory entry before and after publishing to see how the entry changes.
154 Netscape Certificate Management System Installation and Setup Guide • October 2001
parameter value to
dnPattern UID=$req.UID, OU=people,
LdapUserCertRule
LdapUserCertPublisher
under
under