Starting From The Command Line - Netscape MANAGEMENT SYSTEM 6.0 Installation And Setup Manual

Select the instance, right-click, and select the Start Server option from the
4.
pop-up menu.

Starting From the Command Line

To start Certificate Management System from the command line:
Open a terminal window to your server.
1.
In a Unix system, log in as
2.
otherwise, log in either as
At the command-line prompt, enter the following line:
3.
<server_root>/cert-<instance_id>/start-cert[.bat]
specifies the file extension; this is required only when running the utility
.bat
on a Windows system.
If Certificate Management System is already running, the start-up
NOTE
command fails. Stop the server first using the
command, then use the
if the server runs on ports less than 1024;
root
or with the server's user account.
root
command.
start-cert
Chapter 8
Starting Certificate Management System
stop-cert
Starting and Stopping CMS Instances 309