The Installation and Setup Guide explains how to install, configure, and maintain
Netscape Certificate Management System (CMS), and use it for issuing and
managing certificates to various end entities, such as web browsers (users), servers,
Virtual Private Network (VPN) clients, and Cisco™ routers.
This preface has the following sections:
•
What's in This Guide (page 23)
•
What You Should Already Know (page 26)
•
Conventions Used in This Guide (page 27)
•
Where to Go for Related Information (page 28)
What's in This Guide
This guide covers topics that are listed below. You should use this guide in
conjunction with the other CMS documentation, such as the ones that explain all
the plug-ins and command-line tools that are provided for Certificate Management
System. For a complete list of CMS documentation, see section "Where to Go for
Related Information" on page 28.
•
"About This Guide" Describes what's covered in this guide, what you should
already know, and where to look for more information.
Part 1, "Overview and Demo Installation"
•
Chapter 1, "Introduction to Certificate Management System" Provides an
overview of the Certificate Management System architecture for creating,
deploying, and managing certificates.
About This Guide
23
Need help?
Do you have a question about the NETSCAPE MANAGEMENT SYSTEM 6.0 and is the answer not in the manual?
Questions and answers