Step G. Restart Directory Server; Step 3. Configure The Certificate Manager To Publish Certificates; Step A. Modify The Default Mappers, Publishers, And Publishing Rules - Netscape MANAGEMENT SYSTEM 6.0 Installation And Setup Manual

Configuring a Certificate Manager to Publish Certificates and CRLs

Step G. Restart Directory Server

For all your changes to take effect, you must restart Directory Server.
• Starting Directory Server
If you configured the Directory Server for basic authentication or SSL-enabled
communication without client authentication, you can start the server from the
Directory Server window from within Netscape Console:
a.
b.
• Starting SSL-Enabled Directory Server
If you configured the Directory Server for SSL-enabled communication with
client authentication, here's how you must start the server:
Step 3. Configure the Certificate Manager to
Publish Certificates
This section explains how to specify certificate mapping and publishing rules the
Certificate Manager should use to publish certificates to the correct entries in the
directory.
•

Step A. Modify the Default Mappers, Publishers, and Publishing Rules

• Step B. Add Mappers, Publishers, and Publishing Rules
Step A. Modify the Default Mappers, Publishers, and Publishing
Rules
Complete this step if you decided to use any of the default mappers, publishers,
and publishing rules created during installation. If you want to create new
mappers, publishers, and publishing rules, skip to the next step, "Step B. Add
Mappers, Publishers, and Publishing Rules" on page 622.
616 Netscape Certificate Management System Installation and Setup Guide • March 2002
Click the Tasks tab.
Click Restart the Server.
On Windows, start the server from the server's host machine and supply
the PIN or password that protects the key pair you generated for the
Directory Server's certificate. For security reasons, the dialog box that
prompts you for this PIN appears only on the server's host machine.
On Unix, start the server from the command line.